 |
STEP ONE
Using a solvent and cloth clean the mould surface to remove any graphic residue or impurities on the mould surface. |
|
STEP TWO
Spray the mould surface with an even coating of Moulded In adhesive, allow adhesive to tack off. |
 |
STEP THREE
Position graphic in place, using your application pad, rub the back of the clear polyester to transfer the graphic onto the mould surface. |
|
STEP FOUR
Carefully remove and discard the clear polyester. |
 |
STEP FIVE
After removing Polyester backing, it is recommended on larger volume moulds that you spray the back of the graphic with Adhesive or surface enhancer to protect the graphic during the cooking process. |
